Motorized circular saws

OD 500 up to OD 3500 mm | construction site | PE, PP | manual

 

You are looking for a motorized hand circular saw for the rectangular cutting of plastic pipes OD 500 – OD 3500? Then the WIDOS motorized hand ciruclar saw with chain guiding will be the right choice for you.

The motorized hand circular saw has a guide carriage and a tensioning chain for each diameter. The tensioning chains are available from OD 500 up to OD 3500. The cutting depth is approx. 60 mm respectively 110 mm. The easy handling and the optimal safety factor are making the saw indispensible on the construction site.

The motorized hand circular saw with chain guiding is suitable for the rectangular cutting of plastic pipes diameter OD 500 up to OD 3500. The tensioning chain is to be put around the pipe and thightend by means of the chain tensioner. The guide carriage is applied with the hand circular saw. After switching on the motor the saw is plunged. The pipe is then cut by driving around. A quick, clean and rectangular cut is the result. Saw type 1 for pipe wall thickness up to 60 mm and Saw type 35 for pipe wall thickness up to 110 mm.

Despite the high cutting speed the saw has an easy and safe handling and is indispensible on any construction site.
Chains for standard pipes are deliverable from stock, special sizes and extension chains on request.